Publications

Publications

Types

Dates

 to 

2023-2024

  • Article
    Sharbati, Pouya and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "On the effect of static and dynamic contact angles on humid air condensation heat transfer", International Journal of Heat and Mass Transfer, Vol.219 (SCI)
    Alan, Salih and Shaban, Nefize and Kızıltaş, Güllü and Bediz, Bekir (2024) "Concurrent stacking sequence and layout optimization of stiffened composite plates using a spectral element method and an index-based optimization technique", Composite Structures, Vol.327 (SCI)
    Kömürcü, Emre and Kefal, Adnan and Abdollahzadeh, M. A. and Basoglu, M. F. and Kısa, Erdal and Yıldız, Mehmet (2024) "Towards composite suspension control arm: conceptual design, structural analysis, laminate optimization, manufacturing, and experimental testing", Composite Structures, Vol.327 (SCI)
    Ebrahimpour Ahmadi, Vahid and Güler, Tayfun and Çelik, Süleyman and Ronshin, Fedor and Serdyukov, Vladimir and Surtaev, Anton and Sadaghiani, Abdolali Khalili and Koşar, Ali (2024) "Effect of mixed wettability surfaces on flow boiling heat transfer at subatmospheric pressures", Applied Thermal Engineering, Vol.236 (SCI)
    Khandar Shahabad, Peiman and Rafiei Anamagh, Mirmeysam and Serhat, Gökhan and Basdogan, Ipek and Bediz, Bekir (2023) "Advanced lamination parameter interpolation and extrapolation methods for designing manufacturable variable stiffness laminates", Composite Structures, Vol.326 (SCI)
    Lahe Motlagh, Peyman and Bediz, Bekir and Alan, Salih and Kefal, Adnan (2023) "Analysis of smart laminated composites integrated with piezoelectric patches using spectral element method and lamination parameters", Journal of Sound and Vibration, Vol.567 (SCI)
    Parlayan, Onur and Ozdemir, Mirhan and Gayir, Cemal Efe and Simsek, Ugur and Kızıltaş, Güllü (2023) "A new sensitivity-based mapping scheme for topology optimization of graded TPMS designs", International Journal of Advanced Manufacturing Technology, Vol.129, 3197-3220 (SCI)
    Aydın, Mehmet Serhat and Şahin, Mervenaz and Doğan, Zeynep and Kızıltaş, Güllü (2023) "Microstructural characterization of PCL-HA bone scaffolds based on nonsolvent-induced phase separation", ACS Omega, Vol.8, No.50, 47595-47605 (SCI)
    Kecili, Seren and Vural Kaymaz, Sümeyra and Özoğul, Beyzanur and Tekin, H. Cumhur and Elitaş, Meltem (2023) "Investigating influences of intravenous fluids on HUVEC and U937 monocyte cell lines using the magnetic levitation method", Analyst, Vol.148, No.22, 5588-5596 (SCI)
    Elitaş, Meltem and Kalayci Demir, Guleser and Vural Kaymaz, Sümeyra (2023) "Mathematical model for growth and rifampicin-dependent killing kinetics of escherichia coli cells", ACS Omega, Vol.8, No.41, 38452-38458 (SCI)
    Kendibilir, Abdullah and Kefal, Adnan (2023) "Enhanced ship cross-section design methodology using peridynamics topology optimization", Ocean Engineering, Vol.286 (SCI)
    Ganjdoust, Faraz and Kefal, Adnan and Tessler, Alexander (2023) "Delamination detection and localization in vibrating composite plates and shells using the inverse finite element method", Sensors, Vol.23, No.18 (SCI)
    Karimzadehkhoei, Jalal and Sorayani Bafqi, Mohammad Sajad and Saeidiharzand, Shaghayegh and Mohammadilooey, Mandana and Hezarkhani, Marjan and Saner Okan, Burcu and Koşar, Ali and Sadaghiani, Abdolali (2023) "Upcycled graphene integrated fiber-based photothermal hybrid nanocomposites for solar-driven interfacial water evaporation", Desalination, Vol.562 (SCI)
    Abdollahzadeh, Mohammad Amin and Belur, Muhammed Yavuz and Basoglu, Muhammed Fatih and Kefal, Adnan (2023) "Shape sensing of beam-like structures using the robust iFEM-iQS4 inverse shell element", IEEE Transactions on Instrumentation and Measurement, Vol.72 (SCI)
    Maleki, Mohammadamin and Rokhsar Talabazar, Farzad and Seyedmirzaei Sarraf, Seyedali and Sheibani Aghdam, Araz and Bayraktar, Songül and Tuzcuoğlu, Ehsan and Koşar, Ali and Ghorbani, Morteza (2023) "Detergent dissolution intensification via energy-efficient hydrodynamic cavitation reactors", ACS Omega, Vol.8, No.32, 29595-29607 (SCI)
    Ali, Hafiz Qasim and Kheyabani, Aryan and Akalın, Cagdas and Kefal, Adnan and Yıldız, Mehmet (2023) "Numerical and experimental methodologies to investigate the damage progression inside the axisymmetric composite cylinders with cutouts under torsion", Composite Structures, Vol.315 (SCI)
    Tavakol Aghaei, Vahid and Ağababaoğlu, Arda and Bawo, Biram and Naseradinmousavi, Peiman and Yıldırım, Sinan and Yeşilyurt, Serhat and Onat, Ahmet (2023) "Energy optimization of wind turbines via a neural control policy based on reinforcement learning Markov chain Monte Carlo algorithm", Applied Energy, Vol.341 (SCI)
    Namlı, İlayda and Karavelioglu, Zeynep and Seyedmirzaei Sarraf, Seyedali and Sheibani Aghdam, Araz and Varol, Rahmetullah and Yilmaz, Abdurrahim and Şahin, Sevilay Burcu and Özogul, Beyzanur and Bozkaya, Dila Naz and Acar, Havva Funda and Uvet, Huseyin and Çetinel, Sibel and Kutlu, Özlem and Ghorbani, Morteza and Koşar, Ali (2023) "On the application of hydrodynamic cavitation on a chip in cellular injury and drug delivery", Lab On a Chip, Vol.23, No.11, 2640-2653 (SCI)
    Bahçeci, Beste and Erbatur, Kemalettin (2023) "Balance and posture control of legged robots: a survey", Journal of Intelligent and Robotic Systems: Theory and Applications, Vol.108, No.2 (SCI)
    Ganjdoust, Faraz and Kefal, Adnan and Tessler, A. (2023) "A novel delamination damage detection strategy based on inverse finite element method for structural health monitoring of composite structures", Mechanical Systems and Signal Processing, Vol.192 (SCI)
    Kayacık, Sezen Ece and Kocuk, Burak and Yüksel, Tuğçe (2023) "The promise of EV-aware multi-period optimal power flow problem: cost and emission benefits", Sustainable Energy, Grids and Networks, Vol.34 (SCI)
    Ahmad, Faseeh and Patoğlu, Volkan and Erdem, Esra (2023) "Hybrid planning for challenging construction problems: an answer set programming approach", Artificial Intelligence, Vol.319 (SCI)
    Saeidfar, Asal and Yeşilyurt, Serhat (2023) "Numerical investigation of the effects of catalyst layer composition and channel to rib width ratios for low platinum loaded PEMFCs", Applied Energy, Vol.339 (SCI)
    Ozdemir, Mirhan and Simsek, Ugur and Kızıltaş, Güllü and Gayir, Cemal Efe and Celik, Alican and Sendur, Polat (2023) "A novel design framework for generating functionally graded multi-morphology lattices via hybrid optimization and blending methods", Additive Manufacturing, Vol.70 (SCI)
    Muganlı, Zülal and Saeidiharzand, Shaghayegh and Rekuviene, Regina and Samaitis, Vykintas and Jankauskas, Audrius and Koşar, Ali and Gharıb, Ghazaleh and Sadaghiani, Abdolali (2023) "Development and implementation of microbial antifreeze protein based coating for anti-icing", Advanced Materials Interfaces, Vol.10, No.14 (SCI)
    Kenanoğlu, Özgür Taylan and Kenanoglu, Celal Umut and Patoğlu, Volkan (2023) "Effect of low-pass filtering on passivity and rendering performance of series elastic actuation". Published Online First https://dx.doi.org/10.1109/TOH.2023.3273168
    Saeidiharzand, Shaghayegh and Sadaghiani, Abdolali and Yürüm, Alp and Koşar, Ali (2023) "Multiscale superhydrophobic zeolitic imidazolate framework coating for static and dynamic anti-icing purposes", Advanced Materials Interfaces, Vol.10, No.15 (SCI)
    Ghasemzadeh, Maryam and Mokhtari, Mojtaba and Bilgin, Mahmut Hüdayi and Kefal, Adnan (2023) "Pitting corrosion identification approach based on inverse finite element method for marine structure applications", Ocean Engineering, Vol.273 (SCI)
    Çatkın, Bilal and Patoğlu, Volkan (2023) "Preference-based human-in-the-loop optimization for perceived realism of haptic rendering". Published Online First http://dx.doi.org/10.1109/TOH.2023.3266726
    Sharbati, Pouya and Sadaghiani, Abdolali and Koşar, Ali (2023) "New generation dielectrophoretic-based microfluidic device for multi-type cell separation", Biosensors, Vol.13, No.4 (SCI)
    Malekabadi, Fatemeh and Caldag, Hakan Osman and Yeşilyurt, Serhat (2023) "Acoustic radiation forces and torques on elastic micro rings in standing waves", Journal of Fluids and Structures, Vol.118 (SCI)
    Lotfan, Saeed and Dedekoy, Demir and Bediz, Bekir and Cigeroglu, Ender (2023) "A weak-form spectral Chebyshev technique for nonlinear vibrations of rotating functionally graded beams". Published Online First https://dx.doi.org/10.1080/15376494.2023.2181472
    Kenanoğlu, Celal Umut and Patoğlu, Volkan (2023) "A fundamental limitation of passive spring rendering with series elastic actuation". Published Online First http://dx.doi.org/10.1109/TOH.2023.3260063
    Ateş, Ayşenur and Çelik, Süleyman and Yağcı, Vedat and Çağlar Malyemez, Muhammed and Parlak, Murat and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "Flow boiling of dielectric fluid HFE – 7000 in a minichannel with pin fin structured surfaces", Applied Thermal Engineering, Vol.223 (SCI)
    Rafiei Anamagh, Mirmeysam and Gokalp, Kaya and Akyıldız, Taha Atahan and Alan, Salih and Kaya, Kamer and Bediz, Bekir (2023) "A hybrid CPU–GPU solver based on three-dimensional spectral Chebyshev technique for determining the dynamic behavior of thick sandwich panels", Engineering Analysis with Boundary Elements, Vol.147, 181-194 (SCI)
    Rafiei Anamagh, Mirmeysam and Khandar Shahabad, Peiman and Serhat, Gökhan and Basdogan, İpek and Bediz, Bekir (2023) "Eigenfrequency optimization of variable stiffness manufacturable laminates using spectral Chebyshev approach and lamination parameters". Published Online First https://dx.doi.org/10.1080/15376494.2023.2180554
    Shekhar, Shivang and Bediz, Bekir and Özdoğanlar, O. Burak (2023) "Tool-tip dynamics in micromachining with arbitrary tool geometries and the effect of spindle speed", International Journal of Machine Tools and Manufacture, Vol.185 (SCI)
    Li, Mengying and Jia, Dawei and Huang, He and Wu, Ziyan and Kefal, Adnan (2023) "Geometrically nonlinear deformation reconstruction based on iQS4 elements using a linearized iterative iFEM algorithm", Acta Mechanica Solida Sinica, Vol.36, No.1, 166-180 (SCI)
    Zoghipour, Pouya and Hasim, K. A. and Kefal, Adnan and Yıldız, Mehmet (2023) "Implementation of shear-locking-free triangular refined zigzag element for structural analysis of multilayered plates with curvilinear fibers", Composite Structures, Vol.305 (SCI)
    Kendibilir, Abdullah and Polat, Mehmet Furkan and Çavuş, Ömer Safa and Khalilvandi Behrouzyar, Sina and Motlagh, Peyman Lahe and Koç, Bahattin and Kefal, Adnan (2023) "Combination of peridynamics and genetic algorithm based topology optimization methods for additive manufacturing-friendly designs", Journal of Additive Manufacturing Technologies, Vol.2, No.1 (NA)
    Rahmani Dabbagh, Sajjad and Rezapour Sarabi, Misagh and Birtek, Mehmet Tugrul and Mustafaoğlu, Nur and Zhang, Yu Shrike and Tasoglu, Savas (2023) "3D bioprinted organ-on-chips", Aggregate, Vol.4, No.1 (ESCI)
    Parizad Benam, Behnam and Ebrahimpour Ahmadi, Vahid and Motezakker, Ahmad Reza and Saeidiharzand, Shaghayegh and Guillermo Villanueva, Luis and Sun Park, Hyun and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "A parametric study on pool boiling heat transfer and critical heat flux on structured surfaces with artificial cavities", Applied Thermal Engineering, Vol.221 (SCI)
    Ateş, Ayşenur and Parizad Benam, Behnam and Mohammadilooey, Mandana and Çelik, Süleyman and Serdyukov, Vladimir and Surtaev, Anton and Sadaghiani, Abdolali Khalili and Koşar, Ali (2023) "Pool boiling heat transfer on superhydrophobic, superhydrophilic, and superbiphilic surfaces at atmospheric and sub-atmospheric pressures", International Journal of Heat and Mass Transfer, Vol.201, No.Part-2 (SCI)
    Rokhsar Talabazar, Farzad and Maleki, Mohammadamin and Sheibani Aghdam, Araz and Grishenkov, Dmitry and Ghorbani, Morteza and Koşar, Ali (2023) "Cavitation inception and evolution in cavitation on a chip devices at low upstream pressures", Physics of Fluids, Vol.35, No.1 (SCI)
    Kozalak, Gül and Bütün, İsmail and Toyran, Erçil and Koşar, Ali (2023) "Review on bortezomib resistance in multiple myeloma and potential role of emerging technologies", Pharmaceuticals, Vol.16, No.1 (SCI)
    Shojaeian, Milad and Caldag, Hakan Osman and Bozkurt, Ayhan and Yeşilyurt, Serhat (2023) "Fabrication of magnetic helical microribbons made of nickel thin films sandwiched between silicon nitride layers for microswimming applications", Nanotechnology, Vol.34, No.1 (SCI)
  • Papers in Conference Proceedings
    Zemzemoğlu, Muhammed and Ünel, Mustafa, "A hierarchical learning-based approach for the automatic defect detection and classification of AFP process using thermography", 49th Annual Conference of the IEEE Industrial Electronics Society (IECON 2023), IEEE Computer Society, October 2023
    Ermiş, Tuğçe and Şener, Özkul Emre and Elitaş, Meltem, "Cell classification framework using U-Net: convolutional networks for cervix cell segmentation", Emerging Topics in Artificial Intelligence (ETAI) 2023, SPIE (Society of Photo-Optical Instrumentation Engineers), September 2023
    Umut, Özge and Palaz, Miray Esra and Muratlı, Deniz and Kizilyer, Aleyna and Vural Kaymaz, Sümeyra and Ermiş, Tuğçe and Elitaş, Meltem, "U-Net-based segmentation of Escherichia coli cells in the absence and presence of ciprofloxacin exposure", Emerging Topics in Artificial Intelligence (ETAI) 2023, SPIE (Society of Photo-Optical Instrumentation Engineers), September 2023
    İz, Selim Ahmet and Ünel, Mustafa, "Aerial image stitching using IMU data from a UAV", 8th International Conference on Image, Vision and Computing (ICIVC 2023), IEEE (Institute of Electrical and Electronics Engineers), July 2023, 513-518
    Mumcuoğlu, Mehmet Emin and Farea, Shawqi Mohammed Othman and Ünel, Mustafa and Mise, Serdar and Unsal, Simge and Yilmaz, Metin and Koprubasi, Kerem, "Fuel consumption classification for heavy-duty vehicles: a novel approach to identifying driver behavior and system anomalies", AEIT International Conference on Electrical and Electronic Technologies for Automotive, AEIT AUTOMOTIVE 2023, Institute of Electrical and Electronics Engineers, July 2023
    Farea, Shawqi Mohammed Othman and Mumcuoğlu, Mehmet Emin and Ünel, Mustafa and Mise, Serdar and Unsal, Simge and Yilmaz, Metin and Köprübaşı, Kerem, "Towards driving-independent prediction of fuel consumption in heavy-duty trucks", AEIT International Conference on Electrical and Electronic Technologies for Automotive, AEIT AUTOMOTIVE 2023, Institute of Electrical and Electronics Engineers, July 2023
    İz, Selim Ahmet and Ünel, Mustafa, "Vision-based system identification of a quadrotor", 8th International Conference on Image, Vision and Computing (ICIVC 2023), IEEE (Institute of Electrical and Electronics Engineers), July 2023, 584-590
    Akpinar, Sila and Vardar, Emre and Yeşilyurt, Serhat and Kaya, Kamer, "Solving Navier-Stokes equations with mixed equation physics informed neural networks [Navier-Stokes denklemlerinin karma denklemli fizik bilgili nöral ağlarla çözümü]", 31st Signal Processing and Communications Applications Conference (SIU), IEEE (Institute of Electrical and Electronics Engineers), July 2023
    Açar, Eren and Şimşek, Uğur and Gökçay, Barış and Kızıltaş, Güllü, "An inverse synthesis method for the determination of effective mechanical properties for additively manufactured aperiodic structures with finite thickness", 10th International Conference on Recent Advances in Air and Space Technologies (RAST), Institute of Electrical and Electronics Engineers, June 2023
    Öztürk, Sezen and Alipour Ghassabi, Ata and Kızıltaş, Güllü, "Effect of 3d scaffold morphology on bone tissue regeneration based on a multi-physics fem model", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 674-674
    Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü and Alipour Ghassabi, Ata, "Mesenchymal stem cell diffusion integrated mechano- biology analysis of 3d scaffolds", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 1391-1391
    Alipour Ghassabi, Ata and Kızıltaş, Güllü, "Microstructure effect on bone formation of a functionally graded scaffold using a mechanostat-based model", Tissue Engineering and Regenerative Medicine International Society (TERMIS), Mary Ann Liebert, June 2023, 673-673
    Dedeköy, Demir and Ciğeroğlu, Ender and Bediz, Bekir, "Nonlinear vibration analysis of uniform and functionally graded beams with spectral Chebyshev technique and harmonic balance method", Brake, Matthew R.W. and Renson, Ludovic and Kuether, Robert J. and Tiso, Paolo (eds.), 40th IMAC: A Conference and Exposition on Structural Dynamics, Springer Cham, January 2023, 119-129