Yayınlar

Yayınlar

Types

Dates

 to 

2021-2022

  • Makaleler
    Seyyedrahmani, Farzad and Khandar Shahabad, Peiman and Serhat, Gökhan and Bediz, Bekir and Başdoğan, İpek (2022) "Multi-objective optimization of composite sandwich panels using lamination parameters and spectral Chebyshev method", Composite Structures, Vol.289 (SCI)
    Khandar Shahabad, Peiman and Rafiei Anamagh, Mirmeysam and Bediz, Bekir (2022) "Design of laminated conical shells using spectral Chebyshev method and lamination parameters", Composite Structures, Vol.281 (SCI)
    Lotfan, Saeed and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Ciğeroğlu, Ender (2022) "Nonlinear resonances of axially functionally graded beams rotating with varying speed including Coriolis effects", Nonlinear Dynamics, Vol.107, No.1, 533-558 (SCI)
    Tajeddin, Alireza and Mustafaoğlu, Nur (2021) "Design and fabrication of organ-on-chips: promises and challenges", Micromachines, Vol.12, No.12 (SCI)
    Abbasiasl, Taher and Mohammadpour Chehrghani, Mirvahid and Khalili Sadaghiani, abdolali and Koşar, Ali (2021) "Gradient mixed wettability surfaces for enhancing heat transfer in dropwise flow condensation", International Journal of Heat and Mass Transfer, Vol.179 (SCI)
    Alan, Salih and Bediz, Bekir (2021) "A novel electromechanical spectral element method for piezoelectric energy harvester plates", Journal of Sound and Vibration, Vol.505 (SCI)
    Pirouzfam, Niloufar and Şendur, Kürşat (2021) "Tungsten based spectrally selective absorbers with anisotropic rough surface texture", Nanomaterials, Vol.11, No.8 (SCI)
    Sarabi, Misagh Rezapour and Bediz, Bekir and Falo, Louis D. and Korkmaz, Emrullah and Tasoğlu, Savaş (2021) "3D printing of microneedle arrays: challenges towards clinical translation", Journal of 3D Printing in Medicine, Vol.5, No.2, 65-70 (NA)
    Lotfan, Saeed and Rafiei Anamagh, Mirmeysam and Bediz, Bekir (2021) "A general higher-order model for vibration analysis of axially moving doubly-curved panels/shells", Thin-Walled Structures, Vol.164 (SCI)
    Mısırlıoğlu, Burç and Aldulaimi, Wael and Şendur, Kürşat and Akaoğlu, Can and Okatan, Mahmut Barış (2021) "Chirality switching in ferromagnetic nanostructures via nanosecond electric pulses", Annalen der Physik (SCI)
    Kefal, Adnan and Saner Okan, Burcu and Yıldız, Mehmet and Tabrizi, Isa Emami and Gül, S. (2021) "An experimental investigation on damage mechanisms of thick hybrid composite structures under flexural loading using multi-instrument measurements", Aerospace Science and Technology, Vol.117 (SCI)
    Pehlivan, Ahmet Selim and Akşit, Mahmut Faruk and Erbatur, Kemalettin (2021) "Fatigue analysis design approach, manufacturing and implementation of a 500 kW wind turbine main load frame", Energies, Vol.14, No.12 (SCI)
    de Sá Rodrigues, Francisco and Marques, Ricardo Emanuel Monteiro Casaca and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal (2021) "A new methodology for thermoelastic model identification in composite materials using digital image correlation". Published Online First http://dx.doi.org/10.1016/j.optlaseng.2021.106689
    Lotfan, Saeed and Biglari, Hasan and Choupani, Andisheh and Bediz, Bekir (2021) "Dynamics of carbon nanotubes under thermally induced nanoparticle transport on helical tracks", Applied Mathematical Modelling, Vol.93, 684-707 (SCI)
    Lahe, Peyman and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Başdoğan, İpek (2021) "Electromechanical analysis of functionally graded panels with surface-integrated piezo-patches for optimal energy harvesting", Composite Structures, Vol.263 (SCI)
    Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet and Tessler, Alexander (2021) "A smoothed iFEM approach for efficient shape-sensing applications: numerical and experimental validation on composite structures", Mechanical Systems and Signal Processing, Vol.152 (SCI)
    Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet (2021) "An improved ordinary-state based peridynamic formulation for modeling FGMs with sharp interface transitions", International Journal of Mechanical Sciences, Vol.197 (SCI)
    Otaran, Ata and Tokatlı, Ozan and Patoğlu, Volkan (2021) "Physical human-robot interaction using handsOn-SEA: an educational robotic platform with series elastic actuation". Published Online First http://dx.doi.org/10.1109/TOH.2021.3081982
    Niazi, Soroush and Khalili Sadaghiani, Abdolali and Gharıb, Ghazaleh and Kaya, Veysel Ogulcan and Çelik, Süleyman and Kutlu, Özlem and Koşar, Ali (2021) "Bio-coated surfaces with micro-roughness and micro-porosity: Next generation coatings for enhanced energy efficiency", Energy, Vol.222 (SCI)
    Kefal, Adnan and Emami Tabrizi, Isa and Tansan, Murat and Kısa, Erdal and Yıldız, Mehmet (2021) "An experimental implementation of inverse finite element method for real-time shape and strain sensing of composite and sandwich structures", Composite Structures, Vol.258 (SCI)
    Habibian, Anahita and Sohouli, Abdolrasoul and Kefal, Adnan and Nadler, Ben and Yıldız, Mehmet and Suleman, Afzal (2021) "Multi-material topology optimization of structures with discontinuities using peridynamics", Composite Structures, Vol.258 (SCI)
    Nouman, Ahmed and Patoğlu, Volkan and Erdem, Esra (2021) "Hybrid conditional planning for robotic applications", International Journal of Robotics Research, Vol.40, No.2-3, 594-623 (SCI)
    Haşim, Kazım Ahmet and Kefal, Adnan (2021) "Isogeometric static analysis of laminated plates with curvilinear fibers based on refined zigzag theory", Composite Structures, Vol.256 (SCI)
    Alexiadis, Alessio and Albano, Andrea and Rahmat, Amin and Yıldız, Mehmet and Kefal, Adnan and Özbulut, Murat and Bakırcı, Nadi and Garzon Alvarado, Diego Alexander and Duque-Daza, Carlos Alberto and Eslava-Schmalbach, Javier Hernando (2021) "Simulation of pandemics in real cities: enhanced and accurate digital laboratories", Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, Vol.477, No.2245 (SCI)
    Mohammadpour Chehrghani, Mirvahid and Abbasiasl, Taher and Sadaghiani, Abdolali Khalili and Koşar, Ali (2021) "Copper-based superhydrophobic nanostructures for heat transfer in flow condensation", ACS Applied Nano Materials, Vol.4, No.2, 1719-1732 (SCI)
  • Konferans Bildirileri
    Dedeköy, Demir and Ciğeroğlu, Ender and Bediz, Bekir, "Nonlinear vibration analysis of uniform and functionally graded beams with spectral Chebyshev technique and harmonic balance method", International Modal Analysis Conference, SEM (Society for Experimental Mechanics), February 2022
    Tajeddin, Alireza and Mustafaoğlu, Nur and Yapıcı, Murat Kaya, "On-chip measurement of pH using a microcantilever: a biomimetic design approach", Symposium on Design, Test, Integration & Packaging of MEMS and MOEMS (DTIP), IEEE (Institute of Electrical and Electronics Engineers), October 2021
    Motlagh, Peyman Lahe and Rafiei Anamagh, Mirmeysam and Bediz, Bekir and Başdoğan, İpek, "A spectral Tchebychev solution for electrostatic analysis of functionally graded composite plates with integrated piezo-patches", Ferreira, António J. M. and Araújo, Aurélio and Moleiro, Filipa and Madeira, José Aguilar and Soares, Cristóvão Mota and Fantuzzi, Nicholas and Bacciocchi, Michele and Neves, Ana (eds.), 7th International Conference on Mechanics of Composites (MECHCOMP7), University of Porto, September 2021, 159-159
    Adak, Ömer Kemal and Bahçeci, Beste and Erbatur, Kemalettin, "Hybrid force-motion control for one-legged robot in operational space", 2021 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (AIM 2021), IEEE/ASME, August 2021
    Şimşek, Uğur and Gayir, Cemal Efe and Parlayan, Onur and Kızıltaş, Güllü, "Design of graded TPMS with performance preserving density mapping strategy based on adjoint sensitivities", 4th International Conference on Building Materials and Materials Engineering (ICBMM 2020), Materials Science Forum, August 2021
    Mengilli, Uğur and Orhan, Zeynep Özge and Çalışkan, Umut and Patoğlu, Volkan, "Passivity of series damped elastic actuation under velocity-sourced impedance control", IEEE WorldHaptics 2021, IEEE, July 2021
    Bilal, Diyar Khalis and Ünel, Mustafa, "Increasing trajectory tracking accuracy of industrial robots using SINDYc", Embedded Systems, Computational Intelligence and Telematics in Control - 4th CESCIT 2021, International Federation of Automatic Control (IFAC), July 2021
    Khandar Shahabad, Peiman and Rafiei Anamagh, Mirmeysam and Bediz, Bekir, "Buckling analysis of laminated composite panels using 2D spectral Chebyshev and lamination parameters", Ferreira, António J. M. and Santiuste, Carlos and Fantuzzi, Nicholas and Bacciocchi, Michele and Neves, Ana (eds.), 24th International Conference on Composite Structures (ICCS24), University of Porto, June 2021, 90-91
    Kefal, Adnan and Tessler, Alexander, "Delamination damage identification in composite shell structures based on inverse finite element method and refined zigzag theory", 8th International Conference on Marine Structures (MARSTRUCT), Taylor & Francis, June 2021
    Başoğlu, Muhammed Fatih and Zerin, Zihni and Kefal, Adnan and Öterkuş, Erkan, "Development of a micro-crack toughening mechanism for unidirectional composite plates by using peridynamics", 24th International Conference on Composite Structures (ICCS24), Porto, Portugal: University of Porto, June 2021, 101-101
    Marques, Ricardo and Rodrigues, Francisco and Emami Tabrizi, Isa and Kefal, Adnan and Ali, Hafiz Qasim and Yıldız, Mehmet and Suleman, Afzal, "Probabilistic approach for thermoelastic signal source identification in carbon fiber/epoxy composite materials using digital image correlation", 24th International Conference on Composite Structures (ICCS24), University of Porto, June 2021, 162-162
    Kefal, Adnan and Emami Tabrizi, Isa and Yıldız, Mehmet, "Real-time monitoring of crack propagation in fiber-reinforced composite plates using iFEM methodology", 8th International Conference on Marine Structures (MARSTRUCT), Taylor & Francis, June 2021
    Dayan, Alp Recep and Yeşilyurt, Serhat, "Modeling and simulations for magnetic manipulation of micro objects with a visual control system", Signal Processing and Communications Applications (SIU 2021), IEEE, June 2021
    Aydın, Mehmet Serhat and Bilgili, Hatice Kübra and Kızıltaş, Güllü and Emanet, Melis and Özaydın İnce, Gözde, "Fabrication and analysis of surface functionalized porous pcl-nha scaffolds with p(hema-co-egdma) hydrogel via icvd and bmp-2 release simulation", ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), ASME (American Society of Mechanical Engineers), February 2021
    Bilgili, Hatice Kübra and Özaydın İnce, Gözde and Emanet, Melis and Kızıltaş, Güllü, "Fabrication of 3D bone scaffolds functionalized with spatiotemporal release of BMP-2 growth factor via iCVD to enhance osteoregeneration", ASME 2020 International Mechanical Engineering Congress and Exposition (IMECE 2020), ASME (American Society of Mechanical Engineers), February 2021
    Şahin, Mervenaz and Tabak, Ahmet Fatih and Kızıltaş, Güllü, "Initial study towards the integrated design of bone scaffolds based on cell diffusion, growth factor release and tissue regeneration", International Mechanical Engineering Congress & Exposition, ASME Digital Collection, February 2021